View Full Version : Roof Rivets
The other day I notices 4 on the rivets used to retain my roof to the roof frame had falled out. As water was coming in I needed to reseal it quickly so I used pop rivets for a quick fix (it looks terrible but works).
So my question is where does one purchase the flat rivets and what tool do I need to insert them?
Paul
SafeAirOne
02-23-2009, 07:22 AM
You might be able to get the rivets from our hosts. This thread mya be of help: http://www.roversnorth.com/forums/showthread.php?t=5651
Dav1550
02-23-2009, 12:00 PM
The other day I notices 4 on the rivets used to retain my roof to the roof frame had falled out. As water was coming in I needed to reseal it quickly so I used pop rivets for a quick fix (it looks terrible but works).
So my question is where does one purchase the flat rivets and what tool do I need to insert them?
Paul
Semi-tubular as fitted to rain gutter. ( Truss head aluminum )
3/16 dia. x 5/16 L are near perfect replacement.
3/16 dia x 3/8 L I'm thinking would be the choice once the gutter is removed and resealed..... For if going to the trouble of removing the gutter it's a sure thing you'll not be stingy with the sealer and may need a hair more length.
I've got rivets from both Big Flats Rivets & Jay-Cee sales & rivets for doing the roof gutter, side step rubbers door seals and such.
Semi-tubular rivets are a bit different from setting solid rivets and to get them set up tight will require a rivet squeezer with a proper set of matching dies....<$200 plus I would imagine for tool and dies>.. Not hardly worth it though just to set a few rivets ..... You can set them with a dif and a rounded punch. Where in the object is to just get the skirts flared on the underside as so they'll stay in place and hold a bit of tension.
Hope this is of some help.
Dave
SafeAirOne
02-23-2009, 12:56 PM
Semi-tubular rivets are a bit different from setting solid rivets and to get them set up tight will require a rivet squeezer with a proper set of matching dies....<$200 plus I would imagine for tool and dies>.. Not hardly worth it though just to set a few rivets .....
I had a look at my roof gutter rivets--I don't think you'll need that much of an investment in tools--I have a tubular rivet squeezer used for brake linings. I think the reach on the tool is perfect for this job and best of all, it costs under $25.
See:
http://www.aircraftspruce.com/catalog/topages/brakeliningrivset.php
JackIIA
03-05-2009, 10:55 PM
PVKD -
I know this guy used to carry all sorts of Land Rover rivets and necessary tools. Haven't talked with him in years though. Here is the link.
http://www.bigflatsrivet.com/
Also a link to RoverHaul to see restorer's comments on same.
http://www.roverhaul.com/rivets.htm
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.