where to buy footwell panel?

[scott]

i found a bit of rust psg side of lhd footwell. i cut it out and am about to start to fab the patch. seen these panels for sale on uk sites. are there any here in the states.
1644

[I Leak Oil]

I think our host carries them.
Jason T.

[Eric W S]

i found a bit of rust psg side of lhd footwell. i cut it out and am about to start to fab the patch. seen these panels for sale on uk sites. are there any here in the states.
1644

The none ribbed ones? AB has them. They are stout, but lack ribs.

Ribbed ones available from our hosts. That would be my suggestion. And Galvanize the bulkhead. I have no welding talent so I sourced the task out to Ike.

[leafsprung]

RN carries the nicest ones currently available. They do not match the original dimensions exactly but with some work they make a very nice repair. Be sure to grind off the galv before welding. Zinc fumes are not good for you.

[Andrew IIA]

Perhaps George at RDS: http://www.roversdownsouth.com/body.htm

Regards, Andrew
'63 SIIA 88"

[TSR53]

RN carries the nicest ones currently available. They do not match the original dimensions exactly but with some work they make a very nice repair. Be sure to grind off the galv before welding. Zinc fumes are not good for you.

Passenger side LHD galvanized replacement footwells can be found here >>

RNF0006 FOOTWELL ASSM - RH SERIES II, IIA & III
http://www.roversnorth.com/store/images/Product/large/RNF0006.JPG (http://www.roversnorth.com/store/p-5433-footwell-assm-rh-series-ii-iia-iii.aspx)

[scott]

thanks guys. the 1st place i looked was rn. don't know why i couldn't find 'em. i went and fab'd some patches. slightly thicker. was able to save the ribs as the patch stops just above. now the find me a welder. can't get it to my friend's shop with the front axle & suspension off.