PDA

View Full Version : Help wanted



dburrows
04-14-2009, 07:39 PM
i have a 93 rover classic 4.2 grate truck started to run poorly so i gave her a tuneup, plugs wires d-cap rotor flue filter. The flue filter was plugged up good.
now if it dose start it floods out smells ritchl i replace the O2 sensor flue presser regulator and coolant tempter sensor. i cant not get it to run its bin two month please Help


Thanks you

Joey4420
04-15-2009, 07:06 AM
What plugs did you put in?

Did you get OEM or aftermarket D-Cap?

You may have very dirty or clogged open injectors.

I would also clean the intake.

Ed*
04-15-2009, 10:26 AM
if you have repeatedly flooded it, the plugs may be soaked and there could be gas in the oil
may want to check that out once you get it runing

dburrows
04-16-2009, 06:57 AM
Thanks I did have aftermarket plugs an d-cap so when i put the coolant tep sen i put oem plugs in. now i cant even get it run she trys but nodda. their in gas in the oil i wanted it to run right before i waste more oil.

dburrows
04-17-2009, 05:15 PM
dose any one know some were i can take my rover to get help i put over 800 in parts for this one problem i cant afford to guess any more. i live in hubbardsville ny 13355

Joey4420
04-18-2009, 04:19 PM
Not sure up in NY, but if I were to guess and you are smelling fuel, I would say possible worn out injectors... get a fuel pressure gauge and do a leak down test.