PDA

View Full Version : 101 12v Distributor



Les Parker
05-20-2009, 04:44 PM
Does anyone have a lead on a NEW distributor for a 101 F.C. ?
Have somone with a worn out one, bearings/bushings gone.

:(

IIA Lightweight
05-20-2009, 09:44 PM
I would try the 101 club.com I have found a lot of help there.

greenmeanie
05-21-2009, 11:45 AM
Les,
I think the dizzy from a Buick 215 or 350 will fit. I have an HEI dizzy for a 350 that I picked up off ebay that I keep meaning to install. You may need to play with the advance weights and curve a bit but it just used the stock SBC kit available everywhere for that.

Cheaper than a Rover part and a bigger bang. Someday when it cools off a bit down here I'll fit it up and report back.

Les Parker
05-28-2009, 02:29 PM
Thanks for the data.
I tried the 101 F.C. BBS through the MOD link in UK, not much sage advise there either, seems like a closed shop.

:(

greenmeanie
07-30-2009, 01:50 PM
Les,
i forgot to mention this gent. He usually has a bunch of unusual 101 parts and is an enthusiast.

Linky (http://www.nkrecovery.co.uk/1012.html)