Artificer
01-19-2010, 09:33 PM
http://images.sodahead.com/images/polls/0/0/0/5/1/2/5/2/1/polls_farnsworth_4820_962081_poll_xlarge.jpegGood news everyone! I've invented a device that makes you read this in my voice!
Actually, I do have good news. I found a company in Ohio that pretty much ONLY makes motor brushes and other things out of machined or cast graphite/carbon. They sell copper-graphite brushes too, which from my research are apparently the most correct type of brush to use in a D/C system. They have a minimum order of 4 at $3.65 each. I plan on buying at least four. If anyone else is interested, you can reach them at:
Ohio Carbon
(888) 248 5029
Hope this helps!
Actually, I do have good news. I found a company in Ohio that pretty much ONLY makes motor brushes and other things out of machined or cast graphite/carbon. They sell copper-graphite brushes too, which from my research are apparently the most correct type of brush to use in a D/C system. They have a minimum order of 4 at $3.65 each. I plan on buying at least four. If anyone else is interested, you can reach them at:
Ohio Carbon
(888) 248 5029
Hope this helps!