PDA

View Full Version : making a gasket for the thermostat



glbft1
03-16-2010, 04:18 PM
hello,
can i use right stuff gasket maker for the gasket on the thermostat, going to pull the winter thermostat and install the summer one, or do i need the paper one???

SafeAirOne
03-16-2010, 08:50 PM
Don't know if you can or can't, but I prefer to just get some gasket paper, then trace out the gasket using the thermostat housing, then cut it out with scissors and x-acto knife. Works every time without leaking.

4flattires
03-16-2010, 11:17 PM
1. Place the gasket material on the flat surface.

2. Lightly tap with the ball end of a ball pein hammer on the edge (inner or outer) of the item being gasketed.

3. Proceed around the circumference.

4. Bolt/stud holes are the same process. Clean up with a hole punch. The Harbor Freight gasket hole punch set is da bomb.

Done!

Les Parker
03-17-2010, 10:15 AM
Cornflake packets work really well for this. :thumb-up:

stomper
03-17-2010, 11:20 AM
Um, you lost me there Les, could you extrapolate? do you mean making a gasket out of the cereal box cardboard?

scott
03-17-2010, 11:39 AM
Um, you lost me there Les, could you extrapolate? do you mean making a gasket out of the cereal box cardboard?

look at a "real" thermostat gasket while having a bowl of cereal. other than the color i don't see much difference. i'd use cereal box cardboard to make a themostat, fuel or water pump and even a timing cover gasket. i believe the flash point of paper is 450`F. if your motor is hot enough to flame out a paper gasket you got other proplems

yorker
03-17-2010, 11:42 AM
Cornflake packets = cereal boxes

Tapping out gaskets used to be something all apprentice mechanics had to learn to do. There even used to be special gasket hammers for the job.

http://www.sulco.co.nz/products/598/127/532/medium/3207050.jpg
http://www.sulco.co.nz/Category?Action=View&Category_id=532&Layout=Brochure

Les Parker
03-17-2010, 04:17 PM
Thanks for the translation, Yorker !!!!
Perfect description, many an old Triumph, Austin and Mini (proper ones none of the Bundersstuff) cars are still chugging around with Shredded Wheat, Weetabix, Redybrek etc. donated gaskets fitted. Even then we thought green and recycled what we could....

yorker
03-17-2010, 04:29 PM
How does the George Bernard Shaw quote go? "England and America are two countries separated by a common language" ;)

ScottT
03-17-2010, 05:23 PM
Nice video on gasket making.

http://www.youtube.com/watch?v=6rx5hGKt1PY

ignotus
03-18-2010, 07:59 PM
Just use black permatex. No leaks cleans up easy.

smactek
03-19-2010, 06:49 AM
good info for new age mechanics, no wonder the kids think we are all whacky! :D