Sometime between now and spring, I'll be looking for a 2.25 block. There's virtually no chance I'll be (able to afford) buying anything off the shelf from our hosts or other similar sources. As some of you may have read I have a repaired cracked block in my 74 SIII, and while the repair is doing OK for now (weeping a tiny bit of coolant still) and I might be able to do a better (permanent?) repair if I got back in there in the spring, I'd still like to start work on building a new engine - even if it becomes a longer-term project (don't they all?). So any hints on resources for a block would be welcome. My biggest dilemma is that I live in the middle of the Midwest, fairly well isolated from the centers of American Roverdom. So getting it here reasonably, might be the biggest challenge. I'll keep checking Rover Exchange and here and there for possibilities, too. And there are a couple of pockets around this part of the Midwest that might pay off.