Low Range
Vibration issue on the hi-low lever
Is there a bushing or a rubber that I have to change to eliminate the vibration? There a bolt under that's hold the other extremity of the lever; it was loose and I put on a new bolt very tight and the vibration is now less but seems near the transfer case now. Help!
2nd Gear
Theres a small part (Spring shim?) that fits between the ball ( there's a goove in it) of the hi-lo lever and the bracket that bolt to the shaft/arm on the gearbox. It help eliminate the vibe. Part number is 243714. Maybe your's is worn out or missing.
Low Range
Many thanks!
Overdrive
Oddly enough, it's called an "anti-rattle" clip or something like that.
--Mark
1973 SIII 109 RHD 2.5NA Diesel
0-54mph in just under 11.5 minutes
(9.7 minutes now that she's a 3-door).
1st Gear
I just put a small bungee cord around the two levers, did the trick. Now I always have a bungee close to hand.
Posting Permissions
Reply With Quote