Results 1 to 5 of 5

Thread: rim advise

  1. #1
    Join Date
    Jul 2013
    Location
    DALLAS
    Posts
    90

    Default rim advise

    hi ya'll I bought the series 3 and it had some new discovery rims in it nice black ones with silver knobs erasersize lining the inside , I think they look too modern on the landy ,my question is anybody still running the 15 " stock rims with a taller tire to beef it up ,I am thinking of switching back to 15 " , any advice would be great ,gareth dallas,texas

  2. #2
    Join Date
    Oct 2006
    Location
    Brewer, Maine
    Posts
    1,379

    Default

    Tall narrow tires to fit a 15" rim are getting hard to find. I used to run BFG 33X9.50X15 on regular 15" rover rims. I ended up going with Proline Wolf wheels from our host because they gave me more tire choices. You can buy Rover 16" wheels that are 5.5" wide but the rim width will limit which 16" tire you can run. I believe the largest tire is a 235X85X16. I agree that the rims you have do look too modern on a Series. I like my Wolf wheels but some people don't like the way they look on a Series. It comes down personal preference.
    Jim

  3. #3
    Join Date
    Nov 2006
    Location
    Flagstaff, Arizona
    Posts
    1,087

    Default

    I've had Disco I wheels under my Dormobile since 1996 when a dealer made me an offer on take offs that I could not resist. The Discovery I steel wheels are the widest factory rim that will fit a Series truck. At 7 inches they are a half inch wider than the Wolf rim. That extra half inch gives me a wider choice of tyres to choose from. You should be looking for at least a 6 inch wide rim as tall tyres that is spec'ed for a 5-1/2 inch or narrower rim are getting harder to come by.

    Personally I like black rims on a dark coloured truck.




    Note: camped at Kane Creek Moab


    Note: my truck has Defender out wing panels. Camped on Mojave trail


    Note: 1998 picture one year after my truck was repainted British Racing Green. Taken just before going on the 1998 Border to Border trip

  4. #4
    Join Date
    Feb 2010
    Posts
    315

    Default

    16" is also widely available. You have a lot of options in the 16" department as well. The style is the same as the 15" wheels.

    Prepare to take whatever rim you get to the sand blaster. Most of them are rough. Also try to find a shop nearby that can check and true the wheels if needed. A bit more money but well worth it in the end.

  5. #5
    Join Date
    Jul 2013
    Location
    DALLAS
    Posts
    90

    Default

    guys thanks for all the info , I am still on the fence with the rims i am pretty sure in the end i will have the 15" back on
    thanks everybody

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Unparalleled product knowledge. Our mission is to support all original Land Rover models no longer supported by your local Land Rover franchise. We offer the entire range of Land Rover Genuine Parts direct from Land Rover UK, as well as publish North America's largest Land Rover publication, Rovers Magazine.
Join us