Results 1 to 3 of 3

Thread: Series III Signal Lights

  1. #1
    Join Date
    Dec 2010
    Location
    New Caslte, PA 16102
    Posts
    28

    Default Series III Signal Lights

    Has anyone else purchased the signal light kit plk188a from rovers north? I wanted to take the lamps out to write down the part number, but the lamps donít seem to budge with the old push and turn method and I donít want to break them. Is this kit a throw away once the bulbs burn out?
    1974 Series III 88 RHD
    19?? Series IIA 88 LHD (parts)

  2. #2
    Join Date
    Dec 2010
    Location
    New Caslte, PA 16102
    Posts
    28

    Default

    Update: It comes out easy once your break the lamp and use needle pliers to get the base out. Completely replaceable 🙄 HA!

  3. #3

    Default

    Those plastic lamp holders make the Lamp ( Bulb) singularly awkward to remove and unfortunately not the best of designs. As previous, breaking the glass and using pliers to grip and turn usually works . For info. the later lamps used 90/110 have a separate bulb holder , removed from the back which makes servicing easier but not so accessible on a Series Rear. It also need an extension wiring to connect up. See https://rimmerbros.com/ItemList--Def...Lamps--m-16920

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Unparalleled product knowledge. Our mission is to support all original Land Rover models no longer supported by your local Land Rover franchise. We offer the entire range of Land Rover Genuine Parts direct from Land Rover UK, as well as publish North America's largest Land Rover publication, Rovers Magazine.
Join us