Results 1 to 5 of 5

Thread: Series 2 Solex Carb Vacuum advance parts

  1. #1

    Default Series 2 Solex Carb Vacuum advance parts

    Hey all, I just got my first Land Rover, and I'm going to learn a lot on this thing. It's a 1959, and has been robbed of many parts, ridden hard and put away wet. I did manage to get it running by only cleaning things and changing fluids. I noticed right off that there was a golf tee stuck in an unused threaded port on the left side (exhaust side as opposed to engine side) of the carb. I then noticed that it pops and misfires a lot at higher rpm. The next thing I noticed was that there is a vacuum advance on the distro, with nothing going to it. The picture is becoming clear, the vacuum advance unit is disconnected and the necessary parts are missing from the carb. It's a Solex 40PA10-5. Does anyone know what part numbers I need to look for to complete the vacuum circuit from the carb to the vacuum advance unit? I need the banjo bolt or whatever it is that threads into the carb and all associated fittings, and the vacuum line that goes to the advance unit. Once I get that set up I can then determine if I need to replace the advance unit. This is just the beginning of a long saga. The last time this Rover saw the road appears to be 1980. It's got a rotted frame, broken springs, missing exhaust, mismatched tub, seatbox, wings, hood, top. The wiring harness is non existent, and where it does exist it's strictly in a green corroded form. I'm a mechanic by day, and feel comfortable tackling this, but there is a severe lack of LR specific info in my head. I'll get there, though.

  2. #2
    Join Date
    Aug 2020
    chilliwack BC Canada


    I have a rebuilt zenith carb and used dist with working vac advance I can sell you. Unfortunately I dont have a frame, springs, exhaust or wiring harness to sell but I guess you have to start somewhere lol...Seriously tho buy a new weber carb and electronic ignition.

  3. #3


    Wrongway, the upgrade will come in time, but right now I have to get this going on a shoestring budget, replacing broken and missing bits is going to be a large expense. Where I can make something work I have to, for now.

  4. #4


    The tube nut for the pipe into the carb is Rover number 260707 . It is a very course thread and possibly metric. The metal pipe and tube olives I have got from model steam engine suppliers . Has your distributer got a threaded connection for the Vac. pipe or a smooth tube which is for a rubber push on. If threaded, the tube nut is 3783 from the same place
    The Land Rover Series 2 club Forum is a good source of info. If you join the club they have all the shop manuals online to view.
    If you google the part number with Rover there might be a nearer supplier. Pictures from Parts book, why the illustration has inverted I don't know
    Click image for larger version. 

Name:	20201129_171800.jpg 
Views:	19 
Size:	59.2 KB 
ID:	13525
    Click image for larger version. 

Name:	20201129_171748.jpg 
Views:	23 
Size:	62.6 KB 
ID:	13526
    Last edited by roverp480; 11-30-2020 at 05:49 AM.

  5. #5


    Thank you for that roverp480. Exactly what I needed. Iíll be joining the series2club right off

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Unparalleled product knowledge. Our mission is to support all original Land Rover models no longer supported by your local Land Rover franchise. We offer the entire range of Land Rover Genuine Parts direct from Land Rover UK, as well as publish North America's largest Land Rover publication, Rovers Magazine.
Join us