Originally Posted by
dharms
The cruise control on my 1996 Range Rover SE. is not working. The light on the dash lights when switch is engaged. I have replaced the vacuum tubes engine side of the firewall. I have removed the vaccuum pump and bench ran it, it seems to work.
I suspect the steering wheel switch, the set switch does not spring back as the reset switch does. Is this a possible problem? How difficult is it to get at the switch?
Thanks
Question: You can rule out the Cruise Control Unit (PCBA) by answering the following question:
When you stop the vehicle and turn of the engine but with the key still on the accessory position (and within 45 seconds), can you still open or close a window or the sunroof?
If answer is No I would suspec the Criuse Control Unit if Yes I would suspect the switch.
1971 109 Safari Wagon (1 ton chassis)
1995 LWB Range Rover Classic
1997 Defender 90 (repaired at last)
2001 P38A Range Rover