the foam glue-on type should be used with 3m weatherstrip adhesive. put it on both pieces, then let it set up. once it is dry to the touch, put the seal in place and it will stick instantly.
90/110 type seals are so far superior to the early series stuff it isn't even funny. like josh says you need to trim the lip off. i used thenm on my 109 with the old 11a latches and I just had to trim away some of the bulb where the latch passes by.
Originally Posted by
GaryBaxter
I bought the weatherstripping in a large length from Rovah Farm and used Gorilla Glue and am very happy with the results. I also used those metal binder clips from Staples as clamps while the glue dried; you'll need the medium size for around the doors and the larger size for under the doors.
A Land Rover would never turn up to collect an Oscar. It'd be far too busy doing something important, somewhere, for someone."