MY DOOR WON"T OPEN!!!!!!

[dwporter90rc]

the drivers door is stuck closed, (I was cleaning the window motor, it works great, i did not put the door panel on, and it started to rain, so i raised the window, only half way it goes up, so i went insode. the next day the door won't open! i have pulled on the rods, checked the lock, it i ok, but the door just won't open! any ideas how to get it open?

[kevin-ct]

the drivers door is stuck closed, (I was cleaning the window motor, it works great, i did not put the door panel on, and it started to rain, so i raised the window, only half way it goes up, so i went insode. the next day the door won't open! i have pulled on the rods, checked the lock, it i ok, but the door just won't open! any ideas how to get it open?

I have found once that the lock rod (the rod that goes to the knob that you push down pull up to lock/unlock the doors) might be out of adjustment (if the door panel is off)

So pull up the rod while you try to open the door

[dwporter90rc]

I tried that kevin, did not work, i work/look at it all day. nothing!the out side opener, nor does the inside opener work! the lock doesn't do anything! can some one help me! can i get the door open, by taking the pin/latch connected to the body of the truck, i am lost here!

[CliftonRover]

try pushing in on the door really hard when you pull the latch, then open it

[kevin-ct]

I tried that kevin, did not work, i work/look at it all day. nothing!the out side opener, nor does the inside opener work! the lock doesn't do anything! can some one help me! can i get the door open, by taking the pin/latch connected to the body of the truck, i am lost here!

Wow, Can you look at the latch and see the lever that works the locking? Can you see if that is fully unlocking?

My friend had this happened to him, he drove over to my house and I found the locking rod sticking, after applying PB Blaster I was able to open the door after working the lever back and forth.

Not saying you are having trouble with this, but I cannot see the latch had broke by you repairing the window motor.

Where are you located?

[dwporter90rc]

CliftonRover, tried that, Good idea i forgot about that, but nope! Kevin, it all looks like it is working well down there, i am going to tear everything out ( meaning loosing all the screws, and try to remove everything, i can, I can only hope that something else is in the way some how!!!

[phoenix]

jaws of life

[kevin-ct]

Wow, Can you look at the latch and see the lever that works the locking? Can you see if that is fully unlocking?

My friend had this happened to him, he drove over to my house and I found the locking rod sticking, after applying PB Blaster I was able to open the door after working the lever back and forth.

Not saying you are having trouble with this, but I cannot see the latch had broke by you repairing the window motor.

Where are you located?

Didnt I say that? Glad you are not stuck in the car anymore.......

[dwporter90rc]

ok, i took the otherside apart to see how the lock works, I noticed that there is a "hinge" in the lock, fully "flat" it will unlock, hinged just a little it won"t open, which mine was, just a tad. so i got the jack handel, after i tore "EVERYTHING OUT!" and a hammer, and gently taped the "hinge part" flat. this allowed it to work properly, Neadless to say i took it out cleaned it up, really well, and put some teflon on it! I can't find any pictures or learn the name of the parts, so sorry. Or did you mean how i peed? well i had to use the shower, becasue i had to go! with my pants around my ankles, i let it rip!! Darm super big gulps!!!!

Now can anyone tell me where i put the duck tape, to get the window in........