I have a clutch question on my series 3 88. Its a project ive put back together after being off the road for about 10 years. Im flying without a green bible and my haynes manual is better suited as a firestrarter. My clutch is new, new hard lines, new flex (braided SS) new master cyl. new remote bleed set up..I bled it and everything works fine...been driving it...clutch engages and disengages properly, pedal is firm..not too soft not too hard...problem is my pedal always goes to the floor when i shift...but no issues..feels firm but never hits that extra firm hydraulic stop that my brakes do...pedal height is 5.5" off floor. Any advice much appreciated