Results 1 to 3 of 3

Thread: Badge > Grill > Rover

  1. #1
    Join Date
    Jan 2018
    Cape Cod

    Default Badge > Grill > Rover

    I finally purchased a used late 2a metal grill for my Ď69 as well as a replica badge (without pre-drilled holes) from our hosts. Iím looking for pictures of how the badge is attached to the metal grill and then how the grill is attached to the Rover. Any help would be appreciated!

    Click image for larger version. 

Name:	D3D8FF52-4348-4E88-BBD7-C0B88B61400D.jpg 
Views:	89 
Size:	130.9 KB 
ID:	12900

  2. #2
    Join Date
    Oct 2006
    North MS


    There are two holes in the radiator support panel that have pressed in spire nuts. Screws go through the holes in the badge and hold it on and the grill on. The badge is not fastened to the grill itself.

    Click image for larger version. 

Name:	myrovernew12.jpg 
Views:	32 
Size:	114.5 KB 
ID:	12901
    66 IIA 109" Pickup (WIP)
    67 IIA 109" NADA Wagon (sold)
    88, 2.5TD 110 RHD non-hicap pickup

    -I used to know everything there was to know about Land Rovers; then I joined the RN Bulletin Board.

  3. #3


    centre your grille between the headlights then drop it into the two retaining clips at the bottom of the radiator core support, just under the headlights. The badge is attached by screws that pass through the grille mesh and into the snap-in nuts near the top. That holds the grille fast by clamping it between the badge and the core support

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Unparalleled product knowledge. Our mission is to support all original Land Rover models no longer supported by your local Land Rover franchise. We offer the entire range of Land Rover Genuine Parts direct from Land Rover UK, as well as publish North America's largest Land Rover publication, Rovers Magazine.
Join us