I'm having issues with fuel delivery to the carb on my 67 IIA. Just got a new fuel pump (with sediment bowl). The old fuel pump did not have the sediment bowl. I installed the new pump and can prime it by hand just fine - it delivers fuel all the way to the carb. When I crank the engine though, I get no output. Checked that the lines are tight and no obstructions (fuel tank is new, pickup new, etc..).
One thing I did notice is that the old fuel pump without the sediment bowl has a 1/4 inch black block between the fuel pump and the engine. There is a fuel pump gasket on both sides. Is this needed for the pump with the sediment bowl? I don't see this adapter block in any of the catalog pictures.
Any assitance appreciated.
Dave
One thing I did notice is that the old fuel pump without the sediment bowl has a 1/4 inch black block between the fuel pump and the engine. There is a fuel pump gasket on both sides. Is this needed for the pump with the sediment bowl? I don't see this adapter block in any of the catalog pictures.
Any assitance appreciated.
Dave
Comment