Series Rovers w/ D90 fender flares....

[NC Rover]

Looking for some pics of Series rovers with D90 fender flares. My rover has the D90 axles so the wheels stand just slightly outside of the fenders. Rocks tend to sling up the side of the rover so I'm considering the fender flare mod. Any tips or suggestions on what modifications need to be done as well as where to find a set?

Here is the rover in question....

http://i32.photobucket.com/albums/d49/W8kbrder/Land%20Rover/IMG_7699.jpg

http://i32.photobucket.com/albums/d49/W8kbrder/Land%20Rover/IMG_7704.jpg

http://i32.photobucket.com/albums/d49/W8kbrder/Land%20Rover/Tag01.jpg

[graniterover]

I still have those flares man! They are in my garage now.

[CliftonRover]

I hav disco axles on my 109 and I choose to just use wheels with very little back spacing. they are stock rover wheels I believe mine are early 60's 88 wheels. 16" by the way

[msggunny]

Check out Terri Ann's site, i believe you have to have defender fenders in the front for the defender flares to work.

One of our sponsors competitors has some especially for the series. Starts with a D and ends with a P (has an "a" in the middle)

Or at least they did.

You could possibly get the defender flares and cut your fenders too, if you wanted to go that route.

[enovey]

If you want pictures of series rovers with D-90 flares, check out East Coast Rover's site:
http://www.eastcoastrover.com/Gilbert.html
http://www.eastcoastrover.com/SIIITdi.html
http://www.eastcoastrover.com/coilsprung.html

[Leslie]

The Defender and Series have different arch shapes. There are Defender-like flares made for Series, FWIW.....

[Jim-ME]

There are some arches on Ebay-UK for a Series Rover

http://cgi.ebay.co.uk/SERIES-LANDROVER-WHEELARCH-EYEBROWS-RARE_W0QQitemZ290262754967QQcmdZViewItem?hash=item 290262754967&_trkparms=39%3A1%7C66%3A2%7C65%3A10%7C240%3A1318&_trksid=p3286.c0.m14


Jim

[greenmeanie]

IMO the immitation flares shaped to fit series arches look pretty cheesy but each to his own. If you are going to do it I would use the true defender items and trim the wings to fit. I think the best example I've seen is on KevinNY's truck seen here.

http://www.expeditionportal.com/forum/showthread.php?t=11094&page=3

An alternative would be to rivet a strip of rubber to the wheel arch lip so that it extends out by about 1 - 2". It is far more subtle if you want to maintain the series look and works quite well.

Cheers
Gregor

[aleshanic]

Where did you get your lightd from? Non std? They look better than mine

[Tdi Guy]

What size tires are those on your truck?

[NC Rover]

IMO the immitation flares shaped to fit series arches look pretty cheesy but each to his own. If you are going to do it I would use the true defender items and trim the wings to fit. I think the best example I've seen is on KevinNY's truck seen here.

http://www.expeditionportal.com/forum/showthread.php?t=11094&page=3

An alternative would be to rivet a strip of rubber to the wheel arch lip so that it extends out by about 1 - 2". It is far more subtle if you want to maintain the series look and works quite well.

Cheers
Gregor

Yeah thats what I plan on doing...no immatation. Thats the only problem is that I really do like the original series look so I've been brainstorming for some different ideas.

Thanks again for all of the suggestions!