My memory isn't what it used to be, but somehow, those numbers don't sound like the ones on the 4 replacement doors I am now puting on my 110. I bought them 2 years ago, and know I looked at the LR part numbers when I pulled them out a few weeks ago. Either way, one piece doors will go right on in place of your two piece doors, but, unless you find some complete takeoffs, you'll need a ton of bits to finish new shells. There are three felt tracks, inner and outer gaitors, 5 trim fillers (one corner isn't available, L or R) Regulator, regulator panel, glass and inner trim panel. Then there's the latch stuff, inner and outer handles, and lock bits. A real pain to replicate.
I have 2 used front doors (and 2 used rear doors), but I've gutted them to go into the new shells.
RNH459 and RNH460, are the shells only.
Thus you would require the window, winder mechanism, locks, handles, interior trim etc.
We do get, from time to time, complete door assy's, ready to bolt on.
Price is about $900.00 per door.
Les Parker
Tech. Support and Parts Specialist
Rovers North Inc.
Comment