HEAD GASKET ISSUES

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • roll-me-away
    Low Range
    • Jul 2010
    • 1
    #1

    HEAD GASKET ISSUES

    94 DISCO 1 REPLACED HEAD GASKETS CKED SURFACES W/STRAIGHT EDGE
    VISUALLY INSPECTED BLOCK FOR LINER PROBLEM RT BANK HAD BAD GASKET ROTTED OUT NEAR #8 CYLINDER AND LAST WATER PASSAGE THOUGHT IT WAS A NO BRAINER NOW AFTER DRIVING 5-7 MILES TEMP BEGINS TO RISE NO COOLANT IN TANK #8 PLUG WET. ANY SUGGESTIONS?
    Tags: None
    • paddyb
      Low Range
      • Feb 2009
      • 27
      #2
      head gasket??

      1994 land rover discovery! How many miles? i would suggest pulling engine that old and tear down and take to machine shop. A strait edge is not going to give you a correct reading on a vehicle that old. Machine shop can mic block and heads and tell you exact problem. SORRY

        Comment

        • spacemutt
          1st Gear
          • Nov 2008
          • 142
          #3
          The head should always be skimmed and pressure checked before re-fitting.

            Comment

            Previous template Next
            Working...