2003 Disco II vibrations between 35-55MPH

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kgreene
    Low Range
    • Feb 2012
    • 1

    2003 Disco II vibrations between 35-55MPH

    I've recently pulled both front and rear propshafts and had them balanced. This did nothing to get rid of the vibrations I feel when accelerating from 35-55 MPH. I'm wondering if just balancing isn't enough. Can I pull the front shaft and drive to see if the vibes go away? What other troubleshooting can I try?
  • graykale
    Low Range
    • Feb 2013
    • 2

    #2
    Have you had your tires rotated recently? Does the shake come when accelerating or after you let your foot off the gas? If during, drivetrain issue, if after wheel balance issue. This is what has worked for me.

    Comment

    • RNZack
      Administrator
      • Sep 2011
      • 426

      #3
      Have you replaced your panhard rod bushings?

      Comment

      • giftshopduane
        1st Gear
        • Feb 2009
        • 103

        #4
        Replace the front driveshaft. Its not a balance issue, stiff slip yoke or worn u-joints. You won't necessarily feel worn U-joints out of the vehicle.

        Comment

        • dandruka
          Low Range
          • Apr 2009
          • 71

          #5
          X2 on the driveshaft after ruling out the cheaper fixes like tire balance etc
          "Out of every one hundred men, ten should not even be there, eighty are just targets, nine are the real fighters, and we are lucky to have them for they make the battle. Ah, but the one, one is a warrior, and he will bring the others back"

          Comment

          Working...