forward control transmisson

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • frans
    Low Range
    • Mar 2009
    • 29
    #1

    forward control transmisson

    Hello,
    I bought a series 11a that has a forward control transmission mated to a chevy SBC engine.

    The seals are leaking. Oil is coming out of the top, and also from various other parts of it.

    Does anyone have a seal kit for this?
    Also, are there different FC101 transmissions? How would I identify my particular model?

    Thank you
    Frans
    Tags: None
    • greenmeanie
      Overdrive
      • Oct 2006
      • 1358
      #2
      What you have is an LT95 transmission. My advice is to buy/download or whatever the parts book for a 101. I don't think there is a seal kit but all the seals are readily available.

      To stop oil coming out the top there is a foam/felt seal round the shifter rod where it enters the top of the gearbox. This often disintegrates and causes leaks. Most people end up installing a CV boot round the shifter here as it works better.

      There is only one type of 101 gearbox but there are at least two different LT95s. THe 101 version has a shorter bell housing and input shaft while the RR and Stage 1 version have a longer bell housing and input. The 101 version also could come with a bottom mounted PTO to drive the Nokken winch but that is of no use to anything other than a 101.

      You can also change the gearing on your truck as there are several different transfer gear options with the highest being .9962.

        Comment

        • Les Parker
          RN Sales Team - Super Moderator
          • May 2006
          • 2020
          #3
          Are you sure that this is a 101 FC gearbox and not the 110"Series IIB gearbox?
          Can you supply a serial number or a pic of the transmission?

          Les Parker
          Tech. Support and Parts Specialist
          Rovers North Inc.

            Comment

            • frans
              Low Range
              • Mar 2009
              • 29
              #4
              Originally posted by Les Parker
              Are you sure that this is a 101 FC gearbox and not the 110"Series IIB gearbox?
              Can you supply a serial number or a pic of the transmission?

              I will take a picture today, as I have the time, and will look for any #s on it.
              Thank you for the replies.

              A picture is a great idea that way the leaking areas will show.
              Thanks again
              Frans

                Comment

                • frans
                  Low Range
                  • Mar 2009
                  • 29
                  #5
                  Pictures:



                  -looks like I can only load 3 real small pix at a time. Any additional pictures needed please ask
                  Thanks
                  Frans

                    Comment

                    • greenmeanie
                      Overdrive
                      • Oct 2006
                      • 1358
                      #6
                      That's an LT95. Without a serial number there is not much more I can say. They are good strong gearboxes.

                        Comment

                        Previous template Next
                        Working...