62 IIA stud diameter and pitch

[series3dc]

Hello,

Did a search and came up with nothing. Does anyone know what the thread pitch and diameter is on a 62 109? I've tried m14x1.5, m14x2.0, 1/2 and 9/16 lugs with no luck.
Thanks,
Scott

[yorker]

I doubt you'll find any locally. I think they were 9/16"-16 BSF. Landrovers used 9/16 BSF wheel studs up to very late S2a. However someone could have drilled them out and put the later press in studs (either some late 2a with press in 9/16"BSF studs or later still M16 fine)in too.