virgin 109 again....

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • waterman
    Low Range
    • Jun 2012
    • 11

    virgin 109 again....

    I just got my 109 back from the shop. Put new radiator in and the running hot problem went away. Again, thanks to all for the help. Now, need some mo advice....67 109 with 250 chevy, 4 speed with overdrive...shifts well in all gears but 2nd...drops hard when I put it in 2nd and hard to down shift with high rpms into 2nd. what do you veterans think?
  • JimCT
    5th Gear
    • Nov 2006
    • 518

    #2
    double clutching?

    Is it a IIA or III?





    Originally posted by waterman
    I just got my 109 back from the shop. Put new radiator in and the running hot problem went away. Again, thanks to all for the help. Now, need some mo advice....67 109 with 250 chevy, 4 speed with overdrive...shifts well in all gears but 2nd...drops hard when I put it in 2nd and hard to down shift with high rpms into 2nd. what do you veterans think?
    1968 battlefield ambulance/camper
    1963 Unimog Radio box
    1995 LWB RR

    Comment

    • mearstrae
      5th Gear
      • Oct 2011
      • 592

      #3
      Could be a bad synchronizer, if you double clutch into or out of second it should work until it can be addressed.

      '95 R.R.C. Lwb
      '76 Series III Hybrid 109
      '70 Rover 3500S

      Comment

      • JimCT
        5th Gear
        • Nov 2006
        • 518

        #4
        1967

        Did not see the date before. 1st and 2nd are straight cut gears, need to double clutch them both. Nothing wrong with your gearbox, it was built that way.



        Originally posted by mearstrae
        Could be a bad synchronizer, if you double clutch into or out of second it should work until it can be addressed.

        '95 R.R.C. Lwb
        '76 Series III Hybrid 109
        '70 Rover 3500S
        1968 battlefield ambulance/camper
        1963 Unimog Radio box
        1995 LWB RR

        Comment

        • waterman
          Low Range
          • Jun 2012
          • 11

          #5
          Originally posted by JimCT
          Did not see the date before. 1st and 2nd are straight cut gears, need to double clutch them both. Nothing wrong with your gearbox, it was built that way.
          thanx for input>>>i will try the double clutch trick....just getting me feet wet with the 109...not many here in Texas...

          Comment

          Working...