PCV pipe

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bachelier
    Low Range
    • Aug 2009
    • 17
    #1

    PCV pipe

    Need help !
    Few years ago, I took off the PCV PIPE on my serie 3 and now I would like to reinstall it but I lost it. Could you help me? Is it possible to build my own one in stainless? Could you give me the dimension ( circonference, size...)?
    Tags: crankcase ventilation, emission control, pcv, serie 3, serieiii
    • Les Parker
      RN Sales Team - Super Moderator
      • May 2006
      • 2020
      #2
      Is it just the metal line from the oil filler to the valve ?

      # RNC473 ?

      http://www.roversnorth.com/p-2064-pipe-pcv-valveoil-filler.aspx


      If so, RN has stock of this.
      Last edited by Les Parker; 07-27-2012, 10:48 AM. Reason: Added link
      Les Parker
      Tech. Support and Parts Specialist
      Rovers North Inc.

        Comment

        • bachelier
          Low Range
          • Aug 2009
          • 17
          #3
          Many thanks!

            Comment

            • bachelier
              Low Range
              • Aug 2009
              • 17
              #4
              Hi !

              An other problem with my PCV Valve... When I opened it, I found that something was missing : the metal plate (plunger valve) between the spring and the rubber diaphragm. Do you know where I can find it ? Someone can sell me that plunge valve? If it's too rare, do someone can tell me the exact dimension? Maybe with time and love I could build one. Is someone could explain to me how it's working? The little piece under the plate close the hole when there's a counter pressure? Thanks !

                Comment

                Previous template Next
                Working...