Cold Start/Choke Switch

[tolonian]

Does anyone have a photo showing where the cold start/choke switch mounts...I had my bulkhead rebuilt & painted, many of the mounting holes were filled. I'd like to get it back in the proper spot.

Thanks!

[Jim-ME]

What year Rover?
Jim

[tolonian]

What year Rover?
Jim

1971 late IIA..I understand the switch attaches directly to the choke cable....but that's it?
it just sort of dangles on there?

[Jim-ME]

There are two different styles. One that has a metal clamp to hold it in place and the other that just snaps onto the choke cable. When i used the second type I put small wire ties to hold it on. To answer your question yes it just sits there behind the dash and in front of the bulkhead.
Jim

[tolonian]

There are two different styles. One that has a metal clamp to hold it in place and the other that just snaps onto the choke cable. When i used the second type I put small wire ties to hold it on. To answer your question yes it just sits there behind the dash and in front of the bulkhead.
Jim

OK, sounds good, thanks for your response!