Is there a bushing or a rubber that I have to change to eliminate the vibration? There a bolt under that's hold the other extremity of the lever; it was loose and I put on a new bolt very tight and the vibration is now less but seems near the transfer case now. Help!
Vibration issue on the hi-low lever
Collapse
X
-
-
Theres a small part (Spring shim?) that fits between the ball ( there's a goove in it) of the hi-lo lever and the bracket that bolt to the shaft/arm on the gearbox. It help eliminate the vibe. Part number is 243714. Maybe your's is worn out or missing. -
Oddly enough, it's called an "anti-rattle" clip or something like that.--Mark
1973 SIII 109 RHD 2.5NA Diesel
0-54mph in just under 11.5 minutes
(9.7 minutes now that she's a 3-door).Comment
Comment