SIIa max tire width?

[REDrum]

I ordinarily like to run 235/85/16s on my series trucks, but I have an opportunity to get a near new set of (5) 32/12.2/15 tires on rims for VERY short money. (i.e. 500 bux)

What are peoples experience and opinions on running such a wide tire on a series truck, near 3" wider than a 235/85?

Will I be rubbing at 1/4 lock? Would/could some spacers help or will I be into the outside of wheel wells?

[thewap]

My concern would be heavy handling of the truck on and off road with such wide tires on the 2A. Pretty sure you would need spacers which I am not fond of (failure point).

[Donnie]

YES, you will be rubbing, big time......Not a good thing to put such large rubber on a weak drive line..just my opinion
You will however be able to do 120 MPH........40mph foreward------40mph sideways (wobble) & 40mph up & down.....
Stopping every now & then to replace broken drive train parts............................................. ...........................Donnie

[ignotus]

I put 235/70R16's on my 1960 109. I thought that I might get rub with stock rims so I went with a different offset rim from Oklahoma Offroad http://www.okoffroad.com/ and don't for get to look for the Land Rover car wash photo............

HTH,
gene

[I Leak Oil]

Forget the rubbing, that's an awful wide tire for a series rim. I'd be worried about losing the beads.

[REDrum]

I went narrower....

Found a new set of Pirelli Mud Scorpions in 31x9x15 Still a tad wider than I like but off-road tires are very limited down south.