Drive Flange Bolt Size

[antichrist]

1.59375 long per the catalogue? Well by eye I can tell the new ones he bought are .00005" too long! Seriously, where did they come up with that number?

Publications manager: "Hey, we need those measurements of all the fasteners."
Apprentice: "Right, I know, but I can't find a ruler to measure them."
Publications manager: "Well, I don't know....here, use this micrometer set."

[I Leak Oil]

Pretty good apprentice if he can measure it accurately to 5 places. Must be a German!

[jac04]

willincalgary-
When you figure out what you need & how many you need, let me know & I'll get them in the mail. I have several different length brand new genuine drive flange bolts. Lengths I have are 1-3/8", 1.5" and 1-5/8". I have different thread lengths in some of the overall lengths as well.
-Jeff

[willincalgary]

Thanks for the discussion everybody. The drive flange from which the longer bolt came (the longer old bolt, not the new one) is different from all the others. It is round while the others are shaped to match the contours of the hub. I would measure the thickness of the two but the clutch failed in the truck and I couldn't get it home tonight. I will measure it when I next see it and report back.