Tweet
layshaft sheared in IIa suffix B gearbox. Some of the broken bits I removed are brass. appears to be a shim maybe. Looks to be around 1 inch Dia and about a 16th thick has small holes in it. doe any one have any idea what his might be and where it came from.
-
-
That large of brass rubble with holes may be from the 3rd-4th gear syncro. See below.
Last edited by slowmo; 02-12-2016, 03:19 PM.--David
1959 TR3
1970 Series IIa 88" ("Homer")
My hovercraft is full of eels. -
The only other brass I remember being in the main box is the main shaft distance piece. Pictures of the debris?Jason
"Clubs are for Chumps" Club presidentComment
-
failure was a worn out brass caged roller bearing on layshaft. probably 50 year old OE
ShepComment
Comment