Anyone ever see a switch setup like this on a Series 3? First picture shows the switch in place the second with the switch removed but the mounting bracket still in place. The mounting bracket is attached using the bolts that hold the plates that stop the selector seals being pushed out (I think that's their purpose).
In this case only the lower bolt was there and was a pain in the neck to get at.
I've always had a bad oil leak from the selector rod seals maybe this explains some of it.
Mike
In this case only the lower bolt was there and was a pain in the neck to get at.
I've always had a bad oil leak from the selector rod seals maybe this explains some of it.
Mike
Comment