Torrel Disc conversion - calliper won't fit.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • markhutch
    Low Range
    • Jul 2013
    • 4

    Torrel Disc conversion - calliper won't fit.

    I've been rebuilding a '67 Series 2A and had bought the Torrel disc conversion kit some years ago.

    Now I'm trying to fit the callipers and I believe I've followed the instructions correctly but the calliper frame won't fit between the mounting bracket and the rotor.

    Anyone else had this experience? I just don't see how I could do anything differently to mount the frame onto the bracket. (I know the brackets go L->left side and R->right side and the callipers go to the opposite side of their markings (i.e. L->right and R->left) but it doesn't change the fact that there simply isn't enough space to position the frame in the gap between bracket and rotor.
  • vlad_d
    2nd Gear
    • Apr 2021
    • 244

    #2
    Post some pictures, if you can. Not promising I can help, but maybe if we see some pictures - someone else on the forum might have a bright idea?
    ...┌───────┬──,,
    ...|______OD__|__\\_____
    ...d ..__ .........° |°... | ..__....p
    »»└/ | \────┴──┴/ | \─┘≡
    ..../..@........................@

    1973 Series 3, 109

    Comment

    Working...