2.5 Diesel Head Tightening

[LandRoverRo]

Anyone know the sequence and torque settings for putting my head back on my motor?
Torque settings for the rocker arm and rocker/valve gap would also be useful.

Thanks.

[SafeAirOne]

Anyone know the sequence and torque settings for putting my head back on my motor?
Torque settings for the rocker arm and rocker/valve gap would also be useful.

Thanks.

See pages 85 and 86 at:

http://www.landrover.ee/est/files/manuals/cars/defender/Def_90_110_WSM_book2.pdf

[LandRoverRo]

See pages 85 and 86 at:

http://www.landrover.ee/est/files/ma..._WSM_book2.pdf

Thanks very much for the info. I may be missing it somewhere, but where can I find the torque specs?

[SafeAirOne]

Thanks very much for the info. I may be missing it somewhere, but where can I find the torque specs?

It's probably in book #1--I'd check, but I've gotta get to work:

http://www.landrover.ee/est/files/manuals/cars/defender/Def_90_110_WSM_book1.pdf

There are many more factory books available at:

http://www.landrover.ee/est/varia/downloads/cars.htm

The books with the 2.5NA are the 1984-1990 defender manuals

[Moose]

Anyone know the sequence and torque settings for putting my head back on my motor?
Torque settings for the rocker arm and rocker/valve gap would also be useful.

Thanks.

Torque specs and valve clearances

Cylinder head bolts - 91lb/ft
Rockershaft pedestal bolts - 18 lb/ft
Tappet adjuster nut - 18 lb/ft
Tappet clearances - 0.010in (0.25mm)

Hope this helps.

Brett

[LandRoverRo]

Got it. Thanks very much to both of you for your help.