Help - Photo of Clutch lines to flex pipe needed

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pvkd
    1st Gear
    • Jan 2007
    • 118
    #1

    Help - Photo of Clutch lines to flex pipe needed

    Can any one help me with a picture of the clutch lines on a right hand drive Series III. I need to see the the line from the master cylinder to the flex bolts to a bracket on the bulk head.

    Thanks for reading. Please help if you can.

    Paul
    1971 109 Safari Wagon (1 ton chassis)
    1995 LWB Range Rover Classic
    1997 Defender 90 (repaired at last)
    2001 P38A Range Rover
    Tags: None
    • scatterling
      1st Gear
      • Dec 2006
      • 183
      #2
      sorry I don't have better photo's...hope this helps.
      Last edited by scatterling; 07-19-2009, 05:40 PM.
      Neil Hanekom
      '73 LHD 88
      '75 FFR 109 exMOD Build Photo's
      '99 D1

        Comment

        • pvkd
          1st Gear
          • Jan 2007
          • 118
          #3
          Neil,

          Thanks these pictures confirm what I suspected. I had a non-standard (and thus non serviceable) set up installed by the previous owner.

          Thank you for your time!


          Paul
          1971 109 Safari Wagon (1 ton chassis)
          1995 LWB Range Rover Classic
          1997 Defender 90 (repaired at last)
          2001 P38A Range Rover

            Comment

            Previous template Next
            Working...