Block heater Install help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vkjar
    Low Range
    • May 2008
    • 79

    Block heater Install help

    Like everything hindsight is 20/20 and after two weeks of -35C I have decided to install the block heater I picked up two months ago for my 2a. Now with two feet of snow on the ground I have to crawl under it to install it.

    This is the block heater I have. I am trying to locate where it goes. I was told it goes at the back of the block under the Manifold. There seems to be to plugs in the block one forward and one to the rear. Do I have to pry the rear one out to install it.

    Any insite or photos would be of great help so that I may spend as little time in the snow drift as possible.


    Thanks
    1966 SIIa 88"
    Calgary Alberta Canada
    Best thing about working in the northern Canadian bush at -40, very few Black Flies!
  • scott
    Overdrive
    • Oct 2006
    • 1226

    #2
    this was easy cuz i am lazy. got the motor back two weeks ago and the furthest i got was putting it on a stand. i'm guessing this is the port you might want.
    Last edited by scott; 11-03-2009, 11:17 PM.
    '64 Series IIA 88 Canvas Tilt
    '68 Series IIA RHD Ambulance
    '76 Spitfire 1500
    '07 LR3 (Series Recovery Vehicle)

    Comment

    • Les Parker
      RN Sales Team - Super Moderator
      • May 2006
      • 2020

      #3
      To the best of my knowledge, the block heater replaces the centre core plug.
      Giving the warmth to the centre of the engine.

      Les Parker
      Tech. Support and Parts Specialist
      Rovers North Inc.

      Comment

      • scott
        Overdrive
        • Oct 2006
        • 1226

        #4
        my engine only as that one port that's threaded. i've a 64 iia swb but the ser# says my block was once in a 68 109 domestic. i can't see where else. i have a aftermarket heat that is spliced into the lower radiator hose
        '64 Series IIA 88 Canvas Tilt
        '68 Series IIA RHD Ambulance
        '76 Spitfire 1500
        '07 LR3 (Series Recovery Vehicle)

        Comment

        • s3landy
          Low Range
          • Jun 2008
          • 29

          #5
          Scott is right. If the heater is threaded, it goes at the rear of the block under the manifold on the driver's side.

          Mike

          Comment

          • Moose
            2nd Gear
            • Oct 2006
            • 226

            #6
            Not all 2.25 blocks have the threaded port for the block heater. The original engine in my Series 3 had one (which I used) while the Ex-Mod 5-bearing engine in the truck now doesn't.

            Find one that will replace a freeze plug, or go with the lower rad hose heater. The hose heaters work very well and mine has been used in anger at -35F.

            Brett
            Series 3 88 Diesel Soft Top
            Ex-Mod 110 Tdi

            Comment

            • scott
              Overdrive
              • Oct 2006
              • 1226

              #7
              Originally posted by Moose
              ... mine has been used in anger at -35F.

              Brett
              moose, why would anyone live where it get's to -35?!
              '64 Series IIA 88 Canvas Tilt
              '68 Series IIA RHD Ambulance
              '76 Spitfire 1500
              '07 LR3 (Series Recovery Vehicle)

              Comment

              • Moose
                2nd Gear
                • Oct 2006
                • 226

                #8
                Yep, living in those kind of temps is an aquired taste for sure. My family all lives up north so I only have to visit -35 two or three times a winter. ;-)

                Brett
                Series 3 88 Diesel Soft Top
                Ex-Mod 110 Tdi

                Comment

                • vkjar
                  Low Range
                  • May 2008
                  • 79

                  #9
                  -35! I work outside in that all winter, when you talk -55 and below now thats when it becomes interesting. When only a parachute and a herman nelson will get things moving again.

                  ahhh working in the northern bush of Canada in the winter you just gotta love it.........No bugs!!!..........


                  Thanks for the imput
                  1966 SIIa 88"
                  Calgary Alberta Canada
                  Best thing about working in the northern Canadian bush at -40, very few Black Flies!

                  Comment

                  Working...