Front wing panel

[ML-ENGR]

Well Santa didn’t listen, or is having as much trouble locating this as I am.
Im am looking for a RH front wing panel for a 63 IIa, Id like to buy just the front panel if possible, but will take the entire wing if necessary. I would need shipping to 93546. I’ve spoken to a few of the usual suspects with little success.

Any leads appreciated

-Thanks

[Eric W S]

Well Santa didn’t listen, or is having as much trouble locating this as I am.
Im am looking for a RH front wing panel for a 63 IIa, Id like to buy just the front panel if possible, but will take the entire wing if necessary. I would need shipping to 93546. I’ve spoken to a few of the usual suspects with little success.

Any leads appreciated

-Thanks

They don't make the front panel anymore. Nor do they make early series wings either.

Unfortunately, wings are in demand and are not readily available. Took me months to get mine. Marc at www.singingcamel.com hooked me up with his last set.

I'd call Les at RN and see if he can source you one. If he can't call Ike at www.pangolin4x4.com. He should be able to source you a decent used wing.

Good luck

EwS

[Donnie]

They don't make the front panel anymore. Nor do they make early series wings either.

Unfortunately, wings are in demand and are not readily available. Took me months to get mine. Marc at www.singingcamel.com hooked me up with his last set.

I'd call Les at RN and see if he can source you one. If he can't call Ike at www.pangolin4x4.com. He should be able to source you a decent used wing.

Good luck

EwS

What would be the going rate for a good wing these days?

[Terrys]

George at RDS gets them occassionally, but unless you find a RH skin from the UK, it's going to have a heater vent hole in it. He has a full LH wing right now, but he ain't giving it away.

[Donnie]

George at RDS gets them occassionally, but unless you find a RH skin from the UK, it's going to have a heater vent hole in it. He has a full LH wing right now, but he ain't giving it away.

????????????????????????????????????????????????/

[Eric W S]

What would be the going rate for a good wing these days?

The wing itself should run around 150-200. Shipping is going to be REAL expensive.

Compounding pricing is that good straight wing is pretty scarce these days. Took me at least 3 months of calling around to even locate some. A lot of folks just don't want to sell them.

[ML-ENGR]

I have found the same thing, some people have them and wont sell them...

[Eric W S]

????????????????????????????????????????????????/

It's for a later model series. The earlier series generally didn't have heater holes in the skin.

[Daurie]

George at RDS gets them occassionally, but unless you find a RH skin from the UK, it's going to have a heater vent hole in it. He has a full LH wing right now, but he ain't giving it away.

I just got 2 wings from George! nice shape series 3 with headlights and marker lights for $250. I also got ALOT of other stuff including a SWB tub and a roof top with alpine windows sunsheet and vents. I think 250 for a SET of S3 wings in the shape mine are is good! Of course I wen't down with a friend, a list, a F350 and a 14' enclosed trailer too.. Anything big you're best trying to get there in person. George literally gave us a set of door tops, 2 S2 windscreens with good glass and some other small stuff. It's was sickening to hear what he throws away. I asked about an older air cleaner assy. with the intake to accomodate a snorkel hose... "Oh man you're a week late I just thew two of those away!" And guess what pile the tub I brought home was in... and it's in fantastic shape.

[Donnie]

I just got 2 wings from George! nice shape series 3 with headlights and marker lights for $250. I also got ALOT of other stuff including a SWB tub and a roof top with alpine windows sunsheet and vents. I think 250 for a SET of S3 wings in the shape mine are is good! Of course I wen't down with a friend, a list, a F350 and a 14' enclosed trailer too.. Anything big you're best trying to get there in person. George literally gave us a set of door tops, 2 S2 windscreens with good glass and some other small stuff. It's was sickening to hear what he throws away. I asked about an older air cleaner assy. with the intake to accomodate a snorkel hose... "Oh man you're a week late I just thew two of those away!" And guess what pile the tub I brought home was in... and it's in fantastic shape.

I don't know this George person, but I am at a loss as to why he would throw good things away, Is he OK? Old? Ill?
Gets pleasure out of trashing things that others need, no space? Lost interest, family problems? Any one want to explain this one to me... I know a guy, smile, who hangs on to everything, but to trash good parts, especially parts that others need???????????

[Eric W S]

I don't know this George person, but I am at a loss as to why he would throw good things away, Is he OK? Old? Ill?
Gets pleasure out of trashing things that others need, no space? Lost interest, family problems? Any one want to explain this one to me... I know a guy, smile, who hangs on to everything, but to trash good parts, especially parts that others need???????????

"I am not running a rover junk yard" - George.

He's a vendor. He sells new parts. That's what he wants to do.

If your a good customer, he'll go out of his way for you.

[SafeAirOne]

It's was sickening to hear what he throws away. I asked about an older air cleaner assy. with the intake to accomodate a snorkel hose... "Oh man you're a week late I just thew two of those away!" And guess what pile the tub I brought home was in... and it's in fantastic shape.

For everyone now interested in becoming a trash collecter in New Orleans, here's the site of the company that works that particular neighborhood, though it would appear that there are no openings at this time:

http://www.richardsdisposal.com/

[Daurie]

Another big factor is hes moving from New Orleans to Gulfport. I too was shocked to hear of the things he got rid of but I also understand you can't hang on to everything forever.. Most of the things he has to get rid of he's had on the shelf for a while. It's all about being at the right place at the right time. Almost NEVER happens for me.. LOL

[mechman]

I recall that George got smacked pretty hard by Katrina. If I remember right, his shop was under some serious water from Lake Ponchartrain. I've been out of the Rover repair biz for a few years - I'm rather surprised that he reopened at all.

Mech

[Eric W S]

I recall that George got smacked pretty hard by Katrina. If I remember right, his shop was under some serious water from Lake Ponchartrain. I've been out of the Rover repair biz for a few years - I'm rather surprised that he reopened at all.

Mech

George has an offsite warehouse outside of the flood zone...

Can you imagine George not doing what he is doing? Naw.

EwS