Another Galvanizing ?

[ML-ENGR]

I have done a ton of googling and made many phone calls without any luck. Can anyone recommend a galvanizing shop say between SF, Reno and San Diego that they have personally had success with. Looking to do all trim, misc small parts, and possibly the bulkhead.

-thanks

[greenmeanie]

I don't know if this is too far but I have just used these people in Phoenix. They had no problem at all with doing Rover parts. I'll comment on quality tomorrow when I pick my stuff up. Bulkhead, radiator panel and a box load of miscellaneous parts was a pretty reasonable price.

http://www.aztecgalvanizing.com/Locations.htm

[Linus Tremaine]

havent used them

But,
my friend keith who is restoring a 67 NADA dormobile used them.

They lost the interior door pulls (melted in the bottom of the tank presumably)

Good looking work otherwise from what I saw.

http://www.pacificgalv.com/

[jac04]

They lost the interior door pulls (melted in the bottom of the tank presumably)

Same thing happened to mine!