WTB Breakfast

[Pete]

I'm looking for a good condition SIII breakfast.

Pete

[TedW]

The new ones from our hosts are nice - I got one a while back.

I still have the original one I took off my 1970 IIA. You might want to come over and have a look at it - just the usual rot across the bottom - something that a handy guy like you might be able to fix. PM me if you want to see it.

[Eric W S]

I'm looking for a good condition SIII breakfast.

Pete

Our hosts have them...

[Bertha]

http://cgi.ebay.com/Land-Rover-Series-III-3-grille-grill-no-cracks_W0QQitemZ320338411546QQihZ011QQcategoryZ33645QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Mike Koch]

Hi,

Radiator Panel Series IIa-III 1969-1984 2.25 and 2.6 litre. High quality 14 gauge steel reproduction panel:

http://www.roversnorth.com/store/p-15080-radiator-panel-series-iii.aspx

[Bertha]

Hi,

Radiator Panel Series IIa-III 1969-1984 2.25 and 2.6 litre. High quality 14 gauge steel reproduction panel:

http://www.roversnorth.com/store/p-1...eries-iii.aspx

Is that price a misprint

[greenmeanie]

Mike,
Do you sell the matching grill panel supports for IIA grills? The two little metal hooks that rivet in at the bottom of the smaler side windows. Part # should be 330150.

I lost mine having the breakfast panel acid dipped prior to modification. I guess the rivets are not steel.

[jp-]

Those rivets are not steel. I put two tack welds on my brackets before I had my breakfast galvanized. When it came out, all of the rivets were long gone, but the brackets were still there. It's a very simple part, you could easily make them out of 1/16" sheet with a shop press.

I could probably make you two.

[Bertha]

Green-if you come up empty handed let me know and I will dig up a fresh set re-galved along with the proper rivets.