where to buy footwell panel?

[scott]

i found a bit of rust psg side of lhd footwell. i cut it out and am about to start to fab the patch. seen these panels for sale on uk sites. are there any here in the states.

[I Leak Oil]

I think our host carries them.
Jason T.

[Eric W S]

i found a bit of rust psg side of lhd footwell. i cut it out and am about to start to fab the patch. seen these panels for sale on uk sites. are there any here in the states.
[ATTACH]1644[/ATTACH]

The none ribbed ones? AB has them. They are stout, but lack ribs.

Ribbed ones available from our hosts. That would be my suggestion. And Galvanize the bulkhead. I have no welding talent so I sourced the task out to Ike.

[leafsprung]

RN carries the nicest ones currently available. They do not match the original dimensions exactly but with some work they make a very nice repair. Be sure to grind off the galv before welding. Zinc fumes are not good for you.

[Andrew IIA]

Perhaps George at RDS: http://www.roversdownsouth.com/body.htm

Regards, Andrew
'63 SIIA 88"

[TSR53]

RN carries the nicest ones currently available. They do not match the original dimensions exactly but with some work they make a very nice repair. Be sure to grind off the galv before welding. Zinc fumes are not good for you.

Passenger side LHD galvanized replacement footwells can be found here >>

RNF0006 FOOTWELL ASSM - RH SERIES II, IIA & III

[scott]

thanks guys. the 1st place i looked was rn. don't know why i couldn't find 'em. i went and fab'd some patches. slightly thicker. was able to save the ribs as the patch stops just above. now the find me a welder. can't get it to my friend's shop with the front axle & suspension off.