2.25diesel what are the correct flywheel timing marks

[nickjaxe]

Hi guys my name is nick I am over in the UK, unfortunately I think my workshop manual is giving me incorrect information, I in the middle of fitting a new skew gear under the injector pump and need to set it to the correct timing mark on the flywheel,

Now my problem. I have a genuine Landrover workshop manual but I am sure there is a misprint on the timing information it quotes, set the flywheel at 15deg on comp stroke number 1, unfortunately my flywheel don't have a 15deg mark only 13 and 14 deg, its the correct flywheel as I have owned the truck from new its a 1975 2.25 diesel,

So help me out here guys what do your manuals say is the correct flywheel timing marks for the 2.25 diesel, I am stuck till I find this out.

Regards Nick in the UK.

[G.G. Sprock]

Any luck on an answer Nick? I timed mine to the #1 intake valve.

[SafeAirOne]

My SIII bible says 13 deg BTDC on the 2.25.