advice on plugging the leaks 2a 109

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • glbft1
    1st Gear
    • Dec 2006
    • 149

    advice on plugging the leaks 2a 109

    Hello,
    Want to start stopping the leaks on my 109 ..the santana overdrive leaks and so does the main gearbox can i get gaskets for these or can i just use
    some sealant for this and get the leaks to stop??
    Thanks for everything this forum is great and appreciate all the good tips
    Greg
  • Melissa Rose
    Low Range
    • Jun 2009
    • 7

    #2
    Hi Greg,
    What I would do is buy some engine de-greaser and find out where the leaks are and how bad they are. I would think that it would be the seals in the over-drive and seals in the trans, which means that at least some of it will have to come apart. If its a gasket leak check the bolts and see if they are loose, if they are snug them up, if it still leaks it will need to have a new gasket and gasket sealer applied to a clean surface.

    Comment

    Working...