Windscreen Wiper Rubbers

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • jp-
    5th Gear
    • Oct 2006
    • 981
    #16
    Why don't you just use a piece of flat rubber cut to fit?

    It doesn't need the bulge in it.

    Just take a small punch and punch out the center hole and the two mounting holes.
    61 II 109" Pickup (Restomod, 350 small block, TR4050)
    66 IIA 88" Station Wagon (sold)
    66 IIA 109" Pickup (Restomod, 5MGE, R380)
    67 IIA 109" NADA Wagon (sold)
    88, 2.5TD 110 RHD non-hicap pickup

    -I used to know everything there was to know about Land Rovers; then I joined the RN Bulletin Board.

      Comment

      • KingSlug
        1st Gear
        • Oct 2006
        • 177
        #17
        Please read this, if you wish to order...

        We are taking names and numbers over at Guns and Rovers for wiper rubber seals.

        Ike Goss will make the seals for $10 a piece (about the same price as these would cost overseas), you will need 2 individual pieces for one rover. Ike has done this operation in the past, have a look see at the self canceling wheels he made for the series rover turn signal, they are NLA even from RoversNorth. (Here)

        Please respond to this thread at Gun and Rovers if you wish to sign up for wiper rubbers. (Here)

        Thanks
        Visit The Wandering Hippo (my 109 S2A Ambulance).

          Comment

          • Jim-ME
            Overdrive
            • Oct 2006
            • 1379
            #18
            Wiper Rubber Gaskets

            I am not trying to step on Guns and Rovers but, as I promised to this forum, I found a source for the rubber gaskets, Rover part # 302987, for $3.99 per gasket. If you are interested send an e-mail to trevor@rovahfarm.com and let Trevor know how many gaskets you want.
            Jim

              Comment

              • leafsprung
                Overdrive
                • Nov 2006
                • 1008
                #19
                see your other post regarding part 302987

                -Ike

                  Comment

                  Previous 1 2 template Next
                  Working...