front chasis recovery loops

[stomper]

Does anyone know where I can find a set of the galvanized recovery loops that bolt onto the front chasis horns? I have seen them on many of the series IIA rovers, and my horns are drilled for them already, but I can't seem to find them from our host, or other sites I have looked on.

Cheers,
James

[Andrew IIA]

Are these the ones ?


http://www.roversnorth.com/store/p-1244-tow-ring-assm-front-series-iia-iii.aspx

Regards, Andrew
'63 SIIA 88" SW

[stomper]

Those are them! pricy little buggers. I don't know how I could have missed them on the site. Thanks Andrew.

Regards,
James

[TSR53]

The front exMod version is available from stock.

[TSR53]

I've just updated the category

Land Rover Series II, IIA, III > Accessories > Hitches & Receivers

to include these parts.

[TSR53]

Those are them! pricy little buggers. I don't know how I could have missed them on the site. Thanks Andrew.

Regards,
James

RNB611 shown above is for the set of 2 rings.

RNE426 is listed individually

[greenmeanie]

If adding these as recovery points it is a good idea to have a good poke around the front chassis horns. These bolt in usign the bumper mounting holes. Due to the design on the anti crush plate this is a common area where the chassis gets soft.

[stomper]

No problem there, I have an almost new galvy chasis. Thanks for aLL the help guys!