Hello all,
Just replaced my voltage regulator with a ProLine on from our hosts. Also had my generator rebuilt at the same time. I still have a positive ground IIA. When I hooked the generator up today, I started it up and the red generator light on the dash started flashing about once every second with a simultaneous click and drop in the Amps to @ the -30 mark. Working with juice is not my specialty at all, so any help to resolve before I fry my electrics is much appreciated. I tried running a wire from the + battery cable to the generator nodes while unhooked to "prime it to positive ground", but it didn't help - I heard somewhere that that had to be done, but don't know for sure.
Thanks for any and all help.
Jack
Just replaced my voltage regulator with a ProLine on from our hosts. Also had my generator rebuilt at the same time. I still have a positive ground IIA. When I hooked the generator up today, I started it up and the red generator light on the dash started flashing about once every second with a simultaneous click and drop in the Amps to @ the -30 mark. Working with juice is not my specialty at all, so any help to resolve before I fry my electrics is much appreciated. I tried running a wire from the + battery cable to the generator nodes while unhooked to "prime it to positive ground", but it didn't help - I heard somewhere that that had to be done, but don't know for sure.
Thanks for any and all help.
Jack
Comment