Clutch Piping - LHD

[JackIIA]

Hey All,

With LHD Series IIA, I'm assuming the pipe from the Clutch Master Cylinder to the hose that runs down to the Slave Cylinder should be 1/4". I note in the parts manual that there is a 3/16" clutch pipe option too. But I think this is solely for RHD trucks.

For visualization purposes, this pipe I'm talking about is the short 'candy cane' one.

Lastly, I don't have the pipe handy, but how does one measure pipe diameter for autos? Is it a common sense measurement of outside pipe diameter, or more like plumbing and pipe fitting where it is often internal diameter.

[siiirhd88]

The clutch tubing is all 1/4" on my RHD trucks. Tubing is typically measured by its outside diameter, unlike pipe.

Bob

[JackIIA]

Thanks Bob