making a gasket for the thermostat

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • glbft1
    1st Gear
    • Dec 2006
    • 149

    making a gasket for the thermostat

    hello,
    can i use right stuff gasket maker for the gasket on the thermostat, going to pull the winter thermostat and install the summer one, or do i need the paper one???
  • SafeAirOne
    Overdrive
    • Apr 2008
    • 3435

    #2
    Don't know if you can or can't, but I prefer to just get some gasket paper, then trace out the gasket using the thermostat housing, then cut it out with scissors and x-acto knife. Works every time without leaking.
    --Mark

    1973 SIII 109 RHD 2.5NA Diesel

    0-54mph in just under 11.5 minutes
    (9.7 minutes now that she's a 3-door).

    Comment

    • 4flattires
      4th Gear
      • Aug 2007
      • 424

      #3
      Paper and hammer - no tracing needed

      1. Place the gasket material on the flat surface.

      2. Lightly tap with the ball end of a ball pein hammer on the edge (inner or outer) of the item being gasketed.

      3. Proceed around the circumference.

      4. Bolt/stud holes are the same process. Clean up with a hole punch. The Harbor Freight gasket hole punch set is da bomb.

      Done!
      64 SIIa 109 all stock
      69 SIIa 88 all stock
      Old tractors
      New Harleys
      Old trucks

      Comment

      • Les Parker
        RN Sales Team - Super Moderator
        • May 2006
        • 2020

        #4
        Cornflake packets work really well for this.
        Les Parker
        Tech. Support and Parts Specialist
        Rovers North Inc.

        Comment

        • stomper
          5th Gear
          • Apr 2007
          • 889

          #5
          Um, you lost me there Les, could you extrapolate? do you mean making a gasket out of the cereal box cardboard?
          Bad gas mileage gets you to some of the greatest places on earth.

          Comment

          • scott
            Overdrive
            • Oct 2006
            • 1226

            #6
            Originally posted by stomper
            Um, you lost me there Les, could you extrapolate? do you mean making a gasket out of the cereal box cardboard?
            look at a "real" thermostat gasket while having a bowl of cereal. other than the color i don't see much difference. i'd use cereal box cardboard to make a themostat, fuel or water pump and even a timing cover gasket. i believe the flash point of paper is 450`F. if your motor is hot enough to flame out a paper gasket you got other proplems
            '64 Series IIA 88 Canvas Tilt
            '68 Series IIA RHD Ambulance
            '76 Spitfire 1500
            '07 LR3 (Series Recovery Vehicle)

            Comment

            • yorker
              Overdrive
              • Nov 2006
              • 1635

              #7
              Cornflake packets = cereal boxes

              Tapping out gaskets used to be something all apprentice mechanics had to learn to do. There even used to be special gasket hammers for the job.


              1965 SIIa 88",1975 Ex-MOD 109/Ambulance, 1989 RRC, blah, blah, blah...

              Land Rover UK Forums

              Comment

              • Les Parker
                RN Sales Team - Super Moderator
                • May 2006
                • 2020

                #8
                Thanks for the translation, Yorker !!!!
                Perfect description, many an old Triumph, Austin and Mini (proper ones none of the Bundersstuff) cars are still chugging around with Shredded Wheat, Weetabix, Redybrek etc. donated gaskets fitted. Even then we thought green and recycled what we could....
                Les Parker
                Tech. Support and Parts Specialist
                Rovers North Inc.

                Comment

                • yorker
                  Overdrive
                  • Nov 2006
                  • 1635

                  #9
                  How does the George Bernard Shaw quote go? "England and America are two countries separated by a common language"
                  1965 SIIa 88",1975 Ex-MOD 109/Ambulance, 1989 RRC, blah, blah, blah...

                  Land Rover UK Forums

                  Comment

                  • ScottT
                    Low Range
                    • Jul 2008
                    • 96

                    #10
                    Nice video on gasket making.

                    Comment

                    • ignotus
                      2nd Gear
                      • Sep 2009
                      • 237

                      #11
                      Just use black permatex. No leaks cleans up easy.
                      1960 "bitsa" 88--Ignotus
                      1960 109, 200TDI
                      rebuild blog; http://poppageno.blogspot.com/

                      Comment

                      • smactek
                        Low Range
                        • Jan 2007
                        • 10

                        #12
                        good info for new age mechanics, no wonder the kids think we are all whacky!
                        1970 Series IIA 88" Petrol

                        Comment

                        Working...