Leaks

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bob7088
    Low Range
    • May 2007
    • 14

    Leaks

    Ok, so I had a brake fluid leak from under the pedal box and fluid in the floorboard-brake master cylinder, right? So I replaced it, no more leak inside the car, but still have the drip and fluid level in the resevoir (old single type) drops. Brakes feel ok, though. Before I remove the fender to check it, am I right in thinking that the clutch master cylinder is now leaking? Or am I missing something?
  • crankin
    5th Gear
    • Jul 2008
    • 696

    #2
    The drips could come from a crossed thread...or that its not making a good seal. Another thing that coudl be is that when you unscrewed your bleeder valves...you didn't tighten them all the way tight.

    Or you could be like me an dbought an after market wheel sylinder from AB and it sprung a leak...


    Birmabright Brotherhood

    Take the vow, join the brotherhood!


    Clint Rankin - 1972 SIII SWB

    Comment

    • bob7088
      Low Range
      • May 2007
      • 14

      #3
      Thank you for the advice. I'll check the bleeders, but I think I'm still goiing to pull the wing to get to the clutch MC.

      Comment

      Working...