Steen(Lalo88DK),
The picture helps a ton! I have to take the trans out to renew the rear main seal on the motor and don't feel like pulling the complete interior out again... so my dad and i decided to cut the cross member and make brackets so that it will now be removable. we might even add a smiler protection-plate as well.
Steen(Lalo88DK),
The picture helps a ton! I have to take the trans out to renew the rear main seal on the motor and don't feel like pulling the complete interior out again... so my dad and i decided to cut the cross member and make brackets so that it will now be removable. we might even add a smiler protection-plate as well.
Thanks again,
-Mat
I like it...will be R&D'ing this one.... (rob and duplicate).
mike
---------------------------
1961 Ser IIa Hybrid Defender
1969 Ser IIa Bugeye
1980 Ser III Lightweight 24V RHD- sold
1988 LR90 turbo diesel RHD - currently frame off rebuild in progress
1998 Disco - ex wife :-(
2000 Disco - RIP , end over end 2.5 times
2010 RR Sport Supercharged
Comment