Tweet
I've searched and can't find a diagram of the panel cover for the rear signal light wires inside the bed of a NAS Series 3. I need the panels that also cover the reverse lamp wires, they should be square as there is an outline where the original covers were. Does anyone have a picture so I can make some covers?
-
1972 NAS Series 88 SW -
Why make them? Ask our hosts (ask for Les) and they will send out a used set for you.
These are quite common... No need to make them.Owner: James Leach Global Expedition Services.
1995 110 Regular -
'67 sort of station wagon (limestone), '65 gray hardtop, '63 blue Station Wagon, '64 limestone station wagon in piecesComment
-
Those are what I was thinking of, but 1965 did not have the back-up lights, so the cover may be different for the later trucks with back-up lights in the rear panel inboard of the stop lights.
The Defender panels might work too- Mine are cut to clear the roll cage, but I think they are very similar to my late II-a covers. The Defender re-located the back-up light, so it is not inboard of the stop lights any longer. Mine is at the bottom of the tub.
PS: my truck is ROW spec, NOT NA spec. The lights are different...Owner: James Leach Global Expedition Services.
1995 110 RegularComment
Comment