Axles - Different on a LHD?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • amcordo
    5th Gear
    • Jun 2009
    • 740

    Axles - Different on a LHD?

    Are they different on a Series depending on which side is the drivers side? Sounds made up.
  • amcordo
    5th Gear
    • Jun 2009
    • 740

    #2
    Part 2: What is the difference in a frame for a SIII 109 and a Stage 1 109?

    Comment

    • I Leak Oil
      Overdrive
      • Nov 2006
      • 1796

      #3
      Only difference on the axles would be the steering arms. Other than that series axles are the same LHD or RHD.

      As far as the frame goes, the engine,transmsission mounts are different as well as the crossmembers.
      Jason
      "Clubs are for Chumps" Club president

      Comment

      • gudjeon
        5th Gear
        • Oct 2006
        • 613

        #4
        The swivel housing is different due to two tie rods attached on one side depending on steering box position and relay. Apart from that, should be the same inwards.

        S3 and Stage 1-I dunno.

        Comment

        • yorker
          Overdrive
          • Nov 2006
          • 1635

          #5
          Originally posted by amcordo
          Part 2: What is the difference in a frame for a SIII 109 and a Stage 1 109?
          the engine mounts, front crossmember, trannt/transfercase, I also think they lack the crossmember at the bulkhead- Find the thread about Jim Young's 109 build on Seriestrek.com or on Expedition Portal- he made his 109 on a galvanized Stage 1 chassis be bought for $1500 from John Dorr.
          1965 SIIa 88",1975 Ex-MOD 109/Ambulance, 1989 RRC, blah, blah, blah...

          Land Rover UK Forums

          Comment

          Working...